51ºÚÁÏ

This is a lesson about taking products apart and how it can help in the design process. The lesson is based around students obsession with taking pens apart and turns it into a learning activity! There is a power point that guides through the tasks and lesson, a worksheet for the pens and a help sheet to aid writing the results.

This is a power point and worksheet for teaching inputs and outputs for electronic circuits and circuit diagrams. There is a worksheet and information sheet for teaching students about different inputs and outputs and the power point reinforces that knowledge by asking students to draw different circuit diagrams using the information they have.

Included in this resource is a power point, a group worksheet and an individual worksheet. This lesson teaches students about different properties by linking the property with its definition and linking that with a particular product. This is done as a group and then individually on different sheets with a power point to guide the students through the lesson.

This is a resource that includes a presentation around Alessi and different designers. Included are a powerpoint, 6 Alessi designers moodboards and a design sheet. The lesson asks students to design in the style of an Alessi designer using a mood board of that designers work to help them. There is also a ‘guess the price’ task at the end to show the impact of good design.

This is a resource which introduces students to different rendering techniques to show form and different materials using a range of different techniques. Included is a powerpoint presentation which explains all the tasks and a worksheet to complete all of the tasks on.

This is a dimensioned drawing for a small ‘torch’ that can be made using a lathe, milling machine and drilling machine to give students basic machine skills and introduce them to basic functions of each machine and also how to machine metal.

Dimensioned drawing for a stationery holder with instructions of how to make all the parts. This is a metal project using flat steel bars and box section as an introduction to some basic metal working.

This is a resource for the Pearson BTEC Tech Award in Engineering Component 1A. This is the research of different engineered products and the companies that come together to engineer them. This is a pack of resources around the write up of the report. There is a presentation to aid writing up the report and suggest certain companies that can be used around 4 different products, Drone, Motorcycle, Pedal Bike and Car. These have been vetted and researched to make sure all the information is available on the companies websites. There is a write up sheet for research and completed sheets around each company to help the completion of these. There is also an example report which uses different engineering sectors than the ones used by the students and has two made up companies so it cannot be copied but gives students an idea of higher expectations. There is also a help sheet which breaks down the report into manageable parts and explains what to include.

This is a full resource for the Pearson BTEC Tech Award in Engineering Level 1/2 Component 2C. The making task based around the multi tool as used in the exemplar materials. In the pack is a powerpoint with multiple lessons to explain each of the tasks from production plan, manufacturing, write up and evaluation. There is a booklet to fill in with photos taken and write up about each task. A dimension sheet for the tool, help sheets for the production plans and an example. This has been used and moderated at all levels of Pearsons laid out expectations for Level 2 Pass, Merit and Distinction.

In this pack are all the write up resources for Component 2B for the Pearson BTEC Tech Award in Engineering Level 1/2. This is based off the example work and uses the same cheap multi tool which is available cheaply from different websites. This includes a presentation with instructions on and the tasks broken down. A help sheet with the facts about the components used and help in writing the spec. There are worksheets for the observations in the photos. A reassembly guide for the multi tool. There is also a blank workbook to complete the work on paper.

2 different resources that can be used for lessons that need to be covered last minute. One lesson based on tool knowledge and one based on wood knowledge. Have used successfully for a few years, printed out and laminated and left in a draw for when a lesson needs last minute cover. Can be used by any specialism teacher and students can work in books or on paper. Based on a hierarchy system that differentiates the outcomes from a flash task, to a hulk task and finally an incredible task for high ability students.

2 different resources that can be used for lessons that need to be covered last minute. A lesson based on plastics knowledge and a lesson to teach product analysis skills. Have used successfully for a few years, printed out and laminated and left in a draw for when a lesson needs last minute cover. Can be used by any specialism teacher and students can work in books or on paper. Based on a hierarchy system that differentiates the outcomes from a flash task, to a hulk task and finally an incredible task for high ability students.

2 different resources that can be used for lessons that need to be covered last minute. One resource is based around learning flowcharts and the other is about metals knowledge . Have used successfully for a few years, printed out and laminated and left in a draw for when a lesson needs last minute cover. Can be used by any specialism teacher and students can work in books or on paper. Based on a hierarchy system that differentiates the outcomes from a flash task, to a hulk task and finally an incredible task for high ability students.

2 different resources that can be used for lessons that need to be covered last minute. 2 different design tasks. Have used successfully for a few years, printed out and laminated and left in a draw for when a lesson needs last minute cover. Can be used by any specialism teacher and students can work in books or on paper. Based on a hierarchy system that differentiates the outcomes from a flash task, to a hulk task and finally an incredible task for high ability students.

A structures lesson based around making a structure to hold as much weight as possible. All you need is art straws, paper and some weights.

3 powerpoints for a quick metal project on making a keyring from a piece of mild steel. Lots of pictures to explain and all the steps are laid out in each of the presentations. Includes starters and plenaries.

This is a series of resources for students to work through in order to complete the BTEC Engineering Tech Award Unit 2 Learning Aim A Module. The download contains a booklet that students work through and research on the internet to complete. 3 Lessons which set up the module, the research tasks and writing the report. A help sheet for the report and pictures for the product. This is based on the exemplar work that was sent out by the exam board. There are only 3 powerpoints but the lesson 2 powerpoint can be adapted to each of the research tasks. This download should cover about 30 hours when all put together.

7 Workshop posters for each of the common machines in a Design and Technology Workshop. Pillar Drill, Band Saw, Belt Sander, Centre Lathe, Milling machine, Scroll saw and Shot blaster. Designed to be easy to read for students as well as factually correct using most of the HSE terms and rules. Can be mounted to boards with the official risk assessment placed behind for higher ability students.

This is a resource that prints off 15 pages each with two commonly misspelt words used in Design and Technology. Fills a standard large display board.